Logistik und Umwelt
Garbage bin

Customer's Expectations

> Fast colour change to reduce the scrap percentage
> Correct dimension of the part.
> High structural result. Need to move weld lines where will not create internal stress or weakpoints.
> Complete filling of all the ribs and walls.
> Limit the injection pressure considering the customer machine indications.

 

Our Solution

To provide a properly filled part, it was considered the maximum number of injection points.
The solution selected (Aa series and valve gate type) is ideal for those parts with requirement of high structural resistance because it is injecting the expected quantity of material.
For the correct filling of the walls a CAE analysis was performed, this indicated also deformation areas and eventual weak points in the structure. Using the analysis result it was possible to suggest the proper cooling line on the mould.
Minimum flow diameter considered for getting a fast colour change.
The solution applied can be used for many different bin dimensions.

HRSflow system
Our system is a 4 drops As series conical gating with hydraulic actuator free flow. All gatings diameter of Ø7mm with through the cavity end-rings.
General information
Application field Logistics & Environmental
Part name: Garbage bin 180 L
Part size:  482 x 707 x 1,030 mm
Nominal weight: 6,042 g
Nominal thickness: Average 3 mm
Material: HDPE 
Technology: HRSflow
Features